Mortar Cement and Sand Mortar | SPEC MIX
SPEC MIX Mortar Cement & Sand Mortar is available in 80 lb (36.2 kg) packages for easy hand loading or in 3,000 lb (1,360.7 kg) reusable bulk bags to be used with the various SPEC MIX silo systems. When using the silo system, once the bulk bags of mortar are delivered to the project site, the portable silo is loaded with a jobsite forklift and
Veneer Stone Mortar, Polymer Modified - QUIKRETE
minimum of 48 hours prior to the application of Veneer Stone Mortar. Installation Dampen the concrete, masonry or scratch coat substrate with a fine spray of water, but do not soak. Use a trowel to apply a ½” (12 mm) mortar base of Veneer Stone Mortar PM or completely cover the back of the veneer stone with ½” (12 mm) of mortar.
PDF C4: Portland Cement Based Concrete Products
quikrete ® pro-finish blended mason mix 1136-58 all-star veneer stone mortar 1137 . roof tile mortar 1140 . veneer stone mortar 1137 . polymer modified veneer stone mortar 1137-85 . csc-4 1191-84 . tuckpointing mortar - zip and mix 1251-15 . glass block mortar 1610 . k-1 mortar 210280
Concrete Masonry Veneers - Ncma
Veneer is a nonstructural facing of brick, stone, concrete masonry or other masonry material securely attached to a wall or backing. Veneers provide the exterior wall finish and transfer out-of-plane loads directly to the backing, but they are not considered to add to the load-resisting capacity of the wall system.
Historic Restoration with Niagara PHL 3.5 and 5.0
Niagara PHL Limes has the low target strengths needed to provide repair or restoration to mortar joints without harming the brick, stone or masonry unit. PHL 3.5 targets 500 psi and PHL 5.0 targets 750 psi. As a lime based mortar, our PHL limes provide excellent water vapor transference.
Masonry Mortar Types and Joints
Type M Mortar Uses: Below grade applications where extreme gravity or lateral loads are present, such as in retaining walls. In conjunction with hard stone or other masonry units that have a high compressive strength. Type S Mortar. Type S mortar is a medium-strength mortar (minimum 1800 psi).
Mortar Mixes - Concrete, Bagged Cement, Grout - 9 Brothers
Mortar Mixes. Mortar offers a paste-like substance sued to bind bricks in construction. It can be used to fill in gaps between brick and provides a soft and workable option that will become a hard concrete-like substance once it has set. Typically, mortar will be made of sand, cement, or lime and will be mixed with water. . Types of Mortar
Masonry Repair – TCC Materials
TCC Materials® Masonry Cement is designed to be mixed with masonry sand to create masonry mortar for various applications such as brick and stone. Type N Masonry Cement (BOM #100920) is used for non-structural, above-grade applications such as setting brick or stone veneer and comes in a 70 lb. bag. Type S Masonry Cement (BOM  Learn More.
Stone Veneer Mortars – TCC Materials
ProSpec ® Heavy-Duty Stone Veneer Mortar. ProSpec® Heavy-Duty Stone Veneer Mortar (BOM #120444) is a high-yield, lightweight, high-performance, polymer-modified, fiber-reinforced, Portland-cement based mortar for adhered installation of masonry veneer stone and natural stone. 25% lighter than traditional mortars with excellent non-sag and non-slump handling characteristics.
PDF Mortars for Cast Stone Installation
shear bond is lost between the cast stone and mortar. When using a post-setting pointing system, all stone-to-stone joints should be raked to a depth of ¾ in. for later pointing. It should be noted that in many cases, but in particular when setting small veneer pieces, it is not practical to rake out and point all joints.
Natural Stone Veneer For Walls
Natural Stacked Stone Wall Panels | by The Surface Shop. Education Details: Stone Veneer Wall Panel Products are made from cut pieces of natural stone that have been fit and glued together into a highly calibrated panel that is designed to be easy to install. Loose stone comes in a variety of shapes and sizes and has a similar installation process to a panel system product, but the